Which one of the following is an appropriate lockout/tagout procedure

Which one of the following is an appropriate lockout/tagout procedure

Which one of the following is an appropriate lockout/tagout procedure for your computer?

The following eight steps are essential for a lockout/tagout program to be effective:

  1. Step 1: Instructions for equipment.
  2. Step 2: Notify employees affected.
  3. Step 3: Turn off equipment.
  4. Step 4. Disconnect all primary energy sources.
  5. Step 5: Address all secondary resources.
  6. Step 6: Verify that the lockout is active.

What must lockout/tagout tags have on them?

Information on a LOTO tag This will usually include the name and date of attachment, as well as details about the work being done.

What is the purpose of lockout-tagout?

Lockout-Tagout Interactive Training Program: Tutorial – Purpose. What is the purpose and scope of this standard? To protect maintenance and servicing employees from injury caused by unexpected energization, startup or removal of stored energy.

What is lockout/tagout in automotive?

# Tagout and lockout protect employees who service or. Maintain vehicles/equipment through isolating their potential. To prevent damage (controlling its energy potential) Lockout/tagout Prevents. # Equipment that suddenly starts up.

Who can remove lockout tagout?

Lockout or tagout device removal: Each lockout or tagout device must be removed from the energy-isolating device by the employee who applied the device [29 CFR 1910.147(e)(3)].

What is the final step in lockout tagout?

Lockout/Tagout Step 6: Isolation Verification This last step is all about making sure. You’ve successfully shut down the machines and isolated their power source.

Read:  Online Advertising, SEO: Top Myths to Stop Believing Now

How do you do a lockout/tagout procedure?

Lockout Method in 8 Easy Steps

  1. Find the right procedure.
  2. Notify all persons affected by the lockout tagout.
  3. Locate all listed energy sources.
  4. Shut down the equipment or machine.
  5. Lockout all energy-isolating devices and tag them
  6. Release any energy stored (steam, hydraulics, etc.).
  7. Operate controls to test disconnects.
  8. Return controls to the off position.

What is the first step when starting the lockout/tagout procedure?

  1. Prepare for shutdown.
  2. Shut down the equipment or machine.
  3. Disconnect the energy isolating device(s).
  4. Apply the lockout/tagout device(s).
  5. Make all energy stored and/or remaining safe.
  6. Verify that the machine or equipment is isolated and deenergized before you start work.

How do you implement a Loto system?

Follow the steps to perform LOTO correctly and consistently.

  1. 1 – Evaluate and Plan.
  2. 2: Equipment Appraisal.
  3. 3 – Machine Specific Procedures.
  4. 4 – Assessment of isolation devices.
  5. 5 – Procedure Awareness & Training.
  6. 6: Implementation.
  7. 7 – Review your program frequently.

How many types of Loto are there?

four

What is the purpose of Loto?

The purpose of LOTO prevents injury to maintenance and servicing employees from unexpected energizations or startup of machines, equipment, or processes; or the release or storage of energy.

What are Loto devices?

Lockout tagout (LOTO), is a safety measure that requires the use of the appropriate lockout/tagout devices to energy isolation devices. This ensures that neither the energy-isolating equipment nor the equipment under control can be used until the lockout is removed.

Read:  What happens during an electron-capture?

What must be done before removing locks and tags?

Inspect the work area and make sure that all items and tools have been removed. Verify that employees and others are located safely away from dangerous areas. Verify that all controls are in neutral. Re-energize the machine by removing any devices.

What is the difference between affected and authorized employees?

Authorized employees can perform LOTO procedures on machines or equipment by installing LOTO devices and performing servicing or maintenance. However, employees who are affected cannot perform LOTO procedures but can operate the machine or equipment or work in the area where it is located.

When should lockout/tagout be used?

The term “lockout tagout”, refers to the procedures that are used to make sure equipment is turned off and made inoperable while repairs or maintenance work is done. These procedures are designed to protect employees from machinery or equipment that could injure them or cause death if they are not properly managed.

What is a lockout device?

Lockout: A device that uses positive methods, such as locks, blank flanges, and bolted slipblins to keep an energy-isolating gadget in a safe place, preventing it from energizing machinery or equipment.

What is an authorized employee?

What are authorized employees? An authorized employee is a person who locks out equipment or machines to allow them to be serviced or maintained. If the employee’s duties involve performing maintenance or servicing covered by this section, an affected employee is considered to be an authorized employee.

Read:  What is the order in which electromagnetic radiation increases in wavelength?

What lockout/tagout training is required for authorized employees?

Each employee’s name must be included in the certification along with dates and training. Training of authorized employees. The lockout/tagout standard stipulates that the authorized employee must know the following: Recognizing applicable hazardous energy sources.

What are the characteristics of a lockout device?

What are the characteristics and functions of a lockout device.

  • Durable enough to withstand harsh workplace conditions.
  • Standardized according to color, shape, or size.
  • Substantial enough to minimize the likelihood of premature or accidental removal.
  • Labeled is used to identify and remove employees who are authorized to apply.

What is meant by isolation of energy?

What does “isolation” mean? Workers need to be protected from any potential hazards associated with moving parts or electrical energy within confined spaces. This can be done by making sure they are de-energized, or other control.

What is positive isolation?

Positive isolating: The removal of hazardous materials (vapors or liquids), from process piping, equipment, and vessels. It makes it impossible for these materials to enter the work zone. Single Valve Isolation: The majority of common valves only have one sealing surface that isolates upstream pressure and fluids.

Share